Free 350-501 Exam Braindumps certification guide Q&A
350-501 Certification Overview Latest 350-501 PDF Dumps
Candidates for the Cisco 350-501 Exam
The candidates who should take the Cisco 350-501 exam occupy different positions such as network administrators or engineers. Also, it is helpful for system engineers and network managers. Another category of the target audience for this test is formed of network designers and project managers.
The exam-takers will have 120 minutes to answer the questions included in the test. Nonetheless, Cisco doesn’t give too much information on the process itself. However, the candidates should expect to find multiple-choice and multiple-answer as well as drag and drop questions. In any case, its difficulty level is quite high, which means that students should be thoroughly prepared.
Related Certifications
- CCNP Service Provider
Cisco CCNP Service Provider proves your capability to implement service provider solutions. Achieving this certificate requires meticulous mastery of 350-501 exam concepts in addition to passing the concentration test of your liking. That being said, the full list of the concentration options associated with the CCNP Service Provider certification includes the following: Cisco 300-510 Implementing Cisco Service Provider Advanced Routing Solutions (SPRI), Cisco 300-515: Implementing Cisco Service Provider VPN Services (SPVI), Cisco 300-535: Implementing Automation for Cisco Service Provider Solutions (SPAUTO).
- Cisco Certified Specialist – Service Provider Core
Cisco Certified Specialist – Service Provider Core is a creation of the new Cisco curriculum which states that every professional-level exam now earns the candidates a Specialist title alongside the accreditation they are going to obtain. In a nutshell, this is a deserved recognition for your accomplishments at the professional level regardless of your further path.
- CCIE Service Provider
Cisco CCIE Service Provider lies at the pinnacle of the Cisco Service Provider certification track and is exactly the step to make after attaining the CCNP Service Provider certificate. It confirms one's expert-level mastery of Service Provider technologies. To qualify for it, you must pass a combination of two exams a core 350-501 test that focuses on the fundamentals of the field and a hands-on lab exam that checks the mastery of the service provider solutions through a practical environment. The lab exam, in this case, is CCIE Service Provider v5.0.
NEW QUESTION # 339
Refer to the exhibit.
While troubleshooting the network, a network operator with an employee id: 3812:12:993 is trying to ping XR1. Which result should the operator expect when trying to ping to an XR1 local address?
- A. ICMP traffic works at a policed rate of 19 packets every 100 ms.
- B. ICMP traffic works at a policed rate of 19 bytes per second every 100 ms
- C. All ICMP traffic is dropped.
- D. All ICMP traffic responds successfully.
Answer: D
NEW QUESTION # 340
A router is advertising multiple networks to its BGP neighbor in AS 5200 with peer IP address
1.1.1.1. Which configuration must be applied so that the router permits updates only for networks with a prefix mask length less than or equal to 21?
- A.
- B.
- C.
- D.
Answer: C
NEW QUESTION # 341
Simulation 7
Answer:
Explanation:
R1
key chain AUTH_ISIS
key 2
key-string C1sco!
exit
int range et0/0 , et1/0
isis authen key-chain AUTH_ISIS
ip isis
isis metric 15
Copy run start
R2
key chain AUTH_ISIS
key 2
key-string C1sco!
exit
int range et0/0 , et1/0
isis authen key-chain AUTH_ISIS
ip isis
isis metric 20
Copy run start
R3
key chain AUTH_ISIS
key 2
key-string C1sco!
exit
int range et0/0 , et1/0
isis authen key-chain AUTH_ISIS
ip isis
isis metric 25
Copy run start
NEW QUESTION # 342
Refer to the exhibit. Users in AS 65010 are connected with the application server in AS 65050 with these requirements:
- AS 65010 users are experiencing latency and congestion to connect
with application server 172.16.50.10.
- AS 65030 must be restricted to become Transient Autonomous System for traffic flow.
- Links connected to AS 65020 and AS 65040 are underutilized and must
be used efficiently for traffic.
Which two configurations must be implemented to meet these requirements? (Choose two.)
- A. Apply the MED route-map policy for traffic received from R4.
- B. Configure a higher Local preference for R5-R4 BGP peering.
- C. Configure the route map to set the MED 50 attribute for R5-R4 BGP peering.
- D. Configure the route map to prepend the AS-Path attribute for R5-R3 BGP peering.
- E. Apply the AS-Path route-map policy for traffic received from R3.
Answer: C,D
NEW QUESTION # 343
Refer the exhibit.
Users on a network connected to router R3 report slow speeds when they connect to the server connected to R2. After analyzing traffic on the network, a network engineer identified congestion on the link between R2 and R3 as the cause. Which QoS service must the engineer implement to drop traffic on the link when it exceeds a configured threshold?
- A. traffic policing
- B. class-based weighted fair queueing
- C. traffic shaping
- D. first-in, first-out
Answer: A
Explanation:
https://www.cisco.com/c/en/us/support/docs/quality-of-service-qos/qos-policing/19645-policevsshape.html
NEW QUESTION # 344
Refer to the exhibit. OSPF is configured within the core of the service provider network.
Connectivity between CE1 and CE2 is provided through the core. An engineer is implementing MPLS to support traffic exchange between customer sites using Layer 3 VPNs. Which task must the engineer perform to secure VPN traffic to meet the SLA of continuous uptime?
- A. Implement BGP as the PE-CE routing protocol to support labels for faster data transfer
- B. Implement OSPF stub routing to eliminate routes from being shared over the VPN
- C. Implement LDP sync to prevent packet loss
- D. Implement IS-IS in the core to segregate critical traffic between different areas
Answer: C
Explanation:
LDP (Label Distribution Protocol) sync ensures that IGP (OSPF in this case) does not advertise a route into the network until the LDP label bindings for that route are established. This prevents blackholing of traffic during convergence events or label setup. By synchronizing LDP with OSPF, MPLS Layer 3 VPN traffic can flow seamlessly without interruptions, meeting SLA requirements for continuous uptime.
NEW QUESTION # 345
Refer to the exhibit. Which the link aggregation configuration router is running on Cisco IOS XR software, which LACP interface configuration is needed to add the interface to the bundle?
- A.
- B.
- C.
- D.
Answer: C
NEW QUESTION # 346
Refer to the exihibit.
Refer to the exhibit. A service provider engineer Is configuring the connection between CE1 and CE2. AS 200 of the service provider and AS 100 of enterprise ABC should connect using BGP. The engineer already completed the configuration of VRF RT 100:10 of enterprise ABC. Which configuration must the engineer apply on PE1 to meet the requirement?
- A. Option C
- B. Option A
- C. Option B
- D. Option D
Answer: A
Explanation:
The correct configuration for PE1 to connect AS 200 of the service provider with AS 100 of enterprise ABC using BGP, considering the VRF RT 100:10 is already configured, would involve setting up BGP with the correct neighbor and route distinguisher settings. Option C is likely the correct choice as it specifies the BGP neighbor to be within the enterprise ABC's AS 100 and includes the address family configuration necessary for VRF-aware BGP sessions. Reference := The Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR) course materials provide detailed instructions on configuring BGP in a service provider environment, including the use of VRFs and route distinguishers. For more information, please refer to the official Cisco documentation and course materials related to SPCOR1.
NEW QUESTION # 347
Refer to Exhibit. A network engineer is trying to retrieve SNMP MIBs with RESTCONF on the Cisco switch but fails. End-to-end routing is in place. Which configuration must the engineer implement on the switch to complete?
- A. snmp-server community cosco RW
- B. netconf-yang cisco-Ia snmp-community-string Private
- C. netconf-yang cisco-ia snamp-community-string Public
- D. snmp-server community public RO
Answer: B
Explanation:
https://www.cisco.com/c/en/us/support/docs/storage-networking/management/200933-YANG- NETCONF-Configuration-Validation.html
NEW QUESTION # 348
Refer to the exhibit.
An engineer wants to determine which paths are best, second best, third best, and fourth best. Drag and drop the peer addresses on the left to the corresponding BGP best-path selection order on the right.
Best - 50.50.50.2
2nd Best - 40.40.40.2
3rd Best - 20.20.20.2
44th Best - 30.30.30.2
Answer:
Explanation:
NEW QUESTION # 349
Refer to the exhibit:
An engineer is preparing to implement data plane security configuration.
Which statement about this configuration is true?
- A. Router 1 must be configured with uRPF for the RTBH implementation to be effective.
- B. Router 2 must configure a route to null 0 for network 192 168.1 0/24 for the RTBH implementation to be complete.
- C. Router 1 is the trigger router in a RTBH implementation.
- D. Router 2 is the router receiving the DDoS attack
Answer: C
NEW QUESTION # 350
Refer to the exhibit.
A network engineer notices that router R2 is failing to install network 172.16.33.1/32 in the routing table. Which configuration must the engineer apply to R2 to fix the problem?
- A. R2(config)# access-list 1 permit 172,16,33.0 255.255,0,0
- B. R2(config)# access-list 1 permit 172,16,33.0 255,255,255,0
- C. R2(config)# access-list 1 permit 172.16.33.0 0.0.0.255
- D. R2(config)# access-Iist 1 permit 172.16.33.0 255.0.0.0
Answer: C
NEW QUESTION # 351
What are two characteristics of MPLS TE tunnels? (Choose two.)
- A. The headend and tailend routers of the tunnel must have a BGP relationship.
- B. They are unidirectional.
- C. They use RSVP to provide bandwidth for the tunnel.
- D. They are run over Ethernet cores only.
- E. They require EIGRP to be running in the core.
Answer: B,C
NEW QUESTION # 352
A service provider network is currently divided into five IGP domains; four IS-IS domains and one OSPFv2 domain.
Because of customer demand, it has been decided to implement Cisco MPLS TE tunnels using a centralized offline path calculation system.
Which method provides a way to distribute the required information to the path calculation system?
- A. Perform mutual redistribution between all IGP domains.
- B. Convert the OSPFv2 domain to a new IS-IS instance.
- C. Use RSVP-TE IS-IS/OSPFv2 extensions to distribute the information.
- D. Use BGP LS to distribute information across the domains.
Answer: D
NEW QUESTION # 353
Refer to the exhibit:
Which information is provided for traceback analysis when this configuration is applied?
- A. source interface
- B. IP sub flow cache
- C. BGP version
- D. packet size distribution
Answer: D
NEW QUESTION # 354
......
The Best Cisco 350-501 Study Guides and Dumps of 2026: https://braindumps.free4torrent.com/350-501-valid-dumps-torrent.html