[2025] Use Valid New Free JN0-104 Exam Dumps & Answers
JN0-104 Braindumps PDF, Juniper JN0-104 Exam Cram
Juniper JN0-104 (Junos, Associate (JNCIA-Junos)) Certification Exam is a highly sought-after certification for individuals looking to build a career in network engineering. Junos, Associate (JNCIA-Junos) certification is designed to test the candidate's knowledge of the Junos operating system and the basic networking concepts associated with it. Junos, Associate (JNCIA-Junos) certification is the entry-level certification in the Juniper Networks Certification Program and provides a strong foundation for individuals looking to pursue advanced certifications in the future.
Juniper JN0-104 certification is ideal for networking professionals who have basic knowledge of networking concepts and want to enhance their skills in Junos OS. Junos, Associate (JNCIA-Junos) certification provides a solid foundation for individuals who want to pursue advanced certifications in Juniper Networks. Junos, Associate (JNCIA-Junos) certification is also beneficial for individuals who want to advance their career in the networking industry. The JN0-104 certification demonstrates to employers and peers that an individual has the necessary skills to configure and troubleshoot Junos-based devices. Additionally, the certification enables individuals to gain access to Juniper Networks’ technical resources and support, which can help them in their day-to-day work.
NEW QUESTION # 17
Your routing table contains four static routes, which you need to redistribute to your OSPF peers.
Which method would accomplish this task?
- A. Apply an export policy to OSPF, which will export the static routes to your OSPF neighbors.
- B. Apply an export policy to the static route configuration, which will export the routes to other protocols.
- C. Apply an import policy to the forwarding table, which will import the routes, allowing them to be forwarded to OSPF neighbors.
- D. Apply an import policy to OSPF, which will import the static routes into OSPF.
Answer: A
NEW QUESTION # 18
Which of these is the default action for firewall filters?
- A. log
- B. accept
- C. reject
- D. discard
Answer: D
NEW QUESTION # 19
Referring to the Exhibit,
what does the number inside the square bracket represent?
- A. router preference
- B. protocol reference number
- C. local preference
- D. metric
Answer: D
NEW QUESTION # 20
Which command will save the current active configuration as the rescue configuration?
- A. user@router> request system configuration rescue save
- B. user@router# save | rescue
- C. user@router# save rescue configuration
- D. user@router> file save rescue-configuration
Answer: A
NEW QUESTION # 21
Referring to the exhibit,
which command will cause this event message?
- A. request system commit
- B. request system recover
- C. request system logout
- D. request system halt
Answer: D
NEW QUESTION # 22
Which statement is correct about a routing policy term?
- A. The most specific term has precedence.
- B. A term must contain a "from" statement.
- C. Terms can be written in any order to achieve the same behavior.
- D. A term acts like "if" and "then" statements.
Answer: D
NEW QUESTION # 23
Which command will completely turn off a Junos device?
- A. request system power-off
- B. request system recover
- C. request chassis fpc offline
- D. request system halt
Answer: A
NEW QUESTION # 24
You have configured logging to the console port but are uncertain of the impact to the device while troubleshooting.
In this scenario, which command would allow you to minimize the impact?
- A. set system svsloq console any none
- B. commit confirmed 1 comment troubleshoot
- C. set system svsloq log-rotate-frequency 15
- D. commit synchronize comment troubleshoot
Answer: A
NEW QUESTION # 25
While working on a Junos device, you receive the message shown in the exhibit.
In this scenario, what should you do to stop the shutdown process?
In this scenario, what should you do to stop the shutdown process?
- A. Issue the clear system commit command
- B. Issue the request system power-off in 0 command
- C. Issue the clear system reboot command
- D. Issue the request system halt in 0 command
Answer: C
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/reference/command-summary/clear-system-reboot.html
NEW QUESTION # 26
Which of these about candidate configuration are true? (Choose three)
- A. Changes made to the candidate configuration take effect immediately.
- B. A system reboot is needed to change the candidate configuration into active configuration.
- C. The configure private command allows multiple users to edit the candidate configuration
- D. The candidate configuration is a temporary configuration that could become the active configuration.
- E. The candidate configuration is initially a copy of the active configuration.
Answer: C,D,E
NEW QUESTION # 27
Which three statements are true about IPv6 linl local addresses? (Choose three.)
- A. They can be assigned manually or dynamically.
- B. They provide reachability to the internet.
- C. They are not guaranteed to be unique outside of the network segment.
- D. They begin with the prefix fe80::/64.
- E. They are optional adddresses.
Answer: A,C,D
NEW QUESTION # 28
Which of these commands will redistribute static routes into OSPF?
- A. set routing-options static defaults readvertise
- B. set protocols ospf import static-routes
- C. set protocols ospf export static-routes
- D. set routing-options static route 0.0.0.0/0 readvertise
Answer: C
NEW QUESTION # 29
Which two statements describe the connection between control plane and forwarding plane? (Choose two.)
- A. Exception traffic is preferred over the control traffic during congestion.
- B. No rate limiter is configured by default.
- C. A rate limiter is configured by default.
- D. Control traffic is preferred over the exception traffic during congestion.
Answer: C,D
NEW QUESTION # 30
What is the network address for a host with an IP address of 192.168.87.125/16?
- A. 192.168.128.0
- B. 192.168.96.0
- C. 192.168.0.0
- D. 192.168.87.0
Answer: C
Explanation:
The network address for a host is determined by performing a bitwise AND operation between the host's IP address and the subnet mask. In this case, the IP address is 192.168.87.125 and the subnet mask is 255.255.0.0 (or /16), which means that the first 16 bits are used for the network portion of the address and the remaining 16 bits are used for the host portion.
To find the network address, we perform the bitwise AND operation:
192.168.87.125 (IP address)
& 255.255.0.0 (subnet mask)
= 192.168.0.0 (network address)
So, the network address for a host with an IP address of 192.168.87.125/16 is 192.168.0.0.
NEW QUESTION # 31
What are the commands when configuring an IP Address for a Fast Ethernet Interface? (Choose two)
- A. set interfaces fe-0/0/0.0 family inet address 10.1.1.1/24
- B. set interfaces fe-0/0/0 unit 0 family inet address 10.1.1.1/24
- C. set interfaces fe-0/0/0.0 address 10.1.1.1/24
- D. set interfaces fe-0/0/0 address 10.1.1.1/24
Answer: A,B
NEW QUESTION # 32
Which statement is true about exception traffic?
- A. Exception traffic requires a firewall filter before it can be acted upon.
- B. Exception traffic passes through the local device.
- C. Exception traffic requires some form of special handling.
- D. Exception traffic is automatically logged in /var/log/messages.
Answer: C
NEW QUESTION # 33
What does it mean by fe-1/0/11?
- A. Slot 0, FPC 1, Port 11
- B. Slot 0, Port 1, FPC 11
- C. Slot 11, Port 1, FPC 0
Answer: A
NEW QUESTION # 34
Refer to the exhibit.
You asked to create a firewall filter to count IPv6 packets that arrive with a no next header value. As shown in the exhibit, you have created and applied the count-no-header firewall filter to the ge-0/0/0 interface. The commit operation fails.
What is causing this problem?
- A. The filter name must be different than the counter name.
- B. The firewall term does not include inet6 in the from statement.
- C. IPv6 interfaces do not support firewall filters.
- D. The firewall family is not correct.
Answer: D
NEW QUESTION # 35
You are investigating routing problems on a device running the Junos OS. You receive the error shown in the exhibit when you attempt to restart the routing process.
user@router> restart
^
unknown command.
Which statement describes the problem?
- A. You must wait until close of business to restart the routing process, based on user-defined policy.
- B. You do not have permission to restart the routing process.
- C. You have typed an invalid command.
- D. You must be in configuration mode to restart the routing process.
Answer: B
NEW QUESTION # 36
Referring to the exhibit.
which action would synchronize a new router's clock with the NTP Server?
Or
Which action would synchronize the local router's clock with the NTP server?
- A. Configure the correct NTP trusted kay using the set trusted-key <key-value> configuration command under the [edit system ntp] hierarchy.
- B. Configure the NTP server using the set server 172.25.11.254 configuration command under the [edit system ntp] hierarchy.
- C. Issue the set date ntp operational
- D. Reboot the router.
Answer: C
NEW QUESTION # 37
......
The JN0-104 exam consists of 65 multiple-choice questions and has a time limit of 90 minutes. JN0-104 exam covers a wide range of topics, including Junos OS fundamentals, user interfaces, routing and switching fundamentals, Ethernet switching, routing essentials, routing policy and firewall filters, Junos OS administration, and monitoring and troubleshooting Junos OS devices.
Feel Juniper JN0-104 Dumps PDF Will likely be The best Option: https://braindumps.free4torrent.com/JN0-104-valid-dumps-torrent.html