[Jan 11, 2026] Get Latest and 100% Accurate FCSS_NST_SE-7.6 Exam Questions [Q17-Q38]

[Jan 11, 2026] Get Latest and 100% Accurate FCSS_NST_SE-7.6 Exam Questions

Maximum Grades By Making ready With FCSS_NST_SE-7.6 Dumps

NEW QUESTION # 17
What are two functions of automation stitches? (Choose two.)

• A. You can create automation stitches to run diagnostic commands and attach the results to an email message when CPU or memory usage exceeds specified thresholds.
• B. You can set an automation stitch configured to execute actions in parallel to insert a specific delay between actions.
• C. You can configure automation stitches to execute actions sequentially by taking parameters from previous actions as input for the current action.
• D. You can configure automation stitches on any FortiGate device in a Security Fabric environment.

Answer: A,C

NEW QUESTION # 18
Exhibit.

Refer to the exhibit, which shows the output of get system ha status.
NGFW-1 and NGFW-2 have been up for a week.
Which two statements about the output are true? (Choose two.)

• A. If port 7 becomes disconnected on the secondary, both FortiGate devices will elect itself as primary.
• B. If a configuration change is made to the primary FortiGate at this time, the secondary will initiate a synchronization reset.
• C. If no action is taken, the primary FortiGate will leave the cluster because of the current sync status.
• D. If FGVM...649 is rebooted. FGVM...650 will become the primary and retain that role, even after FGVM...649 rejoins the cluster.

Answer: A,D

NEW QUESTION # 19
Exhibit.

Refer to the exhibit, which contains partial output from an IKE real-time debug.
Which two statements about this debug output are correct? (Choose two.)

• A. The initiator provided remote as its IPsec peer ID.
• B. It shows a phase 2 negotiation.
• C. Perfect Forward Secrecy (PFS) is enabled in the configuration.
• D. The local gateway IP address is 10.0.0.1.

Answer: A,B

NEW QUESTION # 20
Exhibit.

Refer to the exhibit, which shows the output of a diagnose command.
What can you conclude about the debug output in this scenario?

• A. There is a natural correlation between the value in the FortiGuard-requests field and the value in the Weight field.
• B. Servers with a negative TZ value are less preferred for rating requests.
• C. FortiGate used 64.26.151.37 as the initial server to validate its contract.
• D. The first server provided to FortiGate when it performed a DNS query looking for a list of rating servers, was 121.111.236.179.

Answer: A

NEW QUESTION # 21
Which three common FortiGate-to-collector-agent connectivity issues can you identify using the FSSO real- time debug? (Choose three.)

• A. Incompatible collector agent software version.
• B. Mismatched pre-shared password.
• C. Inability to reach IP address of the collector agent.
• D. Log is full on the collector agent.
• E. Refused connection. Potential mismatch of TCP port.

Answer: B,C,E

NEW QUESTION # 22
Refer to the exhibit, which shows the output of the command get router info bgp neighbors 100.64.2.254 advertised-routes.

What can you conclude from the output?

• A. The router ID of the neighbor is 100.64.2.254.
• B. The BGP state of the two BGP participants is OpenConfirm.
• C. The local router is advertising the 10.20.30.40/24 network to its BGP neighbor.
• D. The BGP neighbor is advertising the 10.20.30.40/24 network to the local router.

Answer: C

NEW QUESTION # 23
Refer to the exhibit, which shows a partial output of the real-time LDAP debug.

What two actions can the administrator take to resolve this issue? (Choose two.)

• A. Ensure the user logs in using 'John Smith' not 'jsmith'.
• B. Ensure the account is active.
• C. Ensure the user is a member of at least one AD group to ensure step 4 of the LDAP authentication process is successful.
• D. Ensure the user is providing the correct user credentials.

Answer: B,D

NEW QUESTION # 24
Refer to the exhibit, which shows the port1 interface configuration on FortiGate and partial session information for ICMP traffic.

What happens to the session information if a routing change occurs that affects this session?

• A. The session will be flagged as dirty but no route lookups will be performed.
• B. Only the interface and gateway information for dev=7 will be removed.
• C. The session information will not change unless the current route has been removed from the routing table.
• D. Sessions involving port7 or port19 will not have their routing information flushed.

Answer: C

NEW QUESTION # 25
Refer to the exhibit, which shows the output of a policy route table entry.

Which type of policy route does the output show?

• A. A regular policy route, which is associated with an active static route in the FIB
• B. An SD-WAN rule
• C. A regular policy route
• D. An ISDB route

Answer: D

NEW QUESTION # 26
Refer to the exhibit, which shows the output of get router info bgp summary.

Which two statements are true? (Choose two.)

• A. The local ForliGate has received one prefix from BGP neighbor 100.64.1.254.
• B. The local FortiGate is still calculating the prefixes received from BGP neighbor 100.64.2.264
• C. The local FortiGate has received 18 packets from a BGP neighbor.
• D. The TCP connection with BGP neighbor 100.64.2.254 was successful.

Answer: A,C

NEW QUESTION # 27
Refer to the exhibit, which shows the output o! the BGP database.

Which two statements are correct? (Choose two.)

• A. The first four prefixes are being advertised using a legacy route advertisement.
• B. The advertised prefix of 10.20.30.0'24 is being advertised through the redistribution of another routing protocol.
• C. The output shows all prefixes advertised by all neighbors as well as the local router.
• D. The advertised prefix of 10.20.30.0'24 was configured using the network command.

Answer: C,D

NEW QUESTION # 28
Exhibit.

Refer to the exhibit, which shows the output of a session. Which two statements are true? (Choose Iwo.)

• A. The TCP session has been successfully established.
• B. The session is being inspected using flow inspection.
• C. The session was initiated from an authenticated user.
• D. The session is being offloaded.

Answer: A,C

NEW QUESTION # 29
Which authentication option can you not configure under config user radius on FortiOS?

• A. eap
• B. mschap
• C. pap
• D. mschap2

Answer: A

NEW QUESTION # 30
Which statement about protocol options is true?

• A. Protocol options allow administrators to configure a maximum number of sessions for each configured protocol.
• B. Protocol options allow administrators to configure the Any setting for all enabled protocols, which provides the most efficient use of system resources.
• C. Protocol options give administrators a streamlined method to instruct FortiGate to block all sessions corresponding to disabled protocols.
• D. Protocol options allow administrators to configure which Layer 4 port numbers map to upper-layer protocols, such as HTTP, SMTP, FTP, and so on.

Answer: D

NEW QUESTION # 31
Refer to the exhibit showing a debug output.

An administrator deployed FSSO in DC Agent Mode but FSSO is failing on FortiGate. Pinging FortiGate from where the collector agent is deployed is successful.
The administrator then produces the debug output shown in the exhibit.
What could be causing this error message?

• A. The FortiGate cannot resolve the active directory server name.
• B. The collector agent preshared password is mismatched.
• C. The FortiGate and the collector agent are using different TCP ports.
• D. The TCP port 445 is blocked between FortiGate and collector agent.

Answer: C

NEW QUESTION # 32
Refer to the exhibit, which shows a truncated output of a real-time LDAP debug.

What two conclusions can you draw from the output? (Choose two.)

• A. FortiOS is performing the second step (Search Request) in the LDAP authentication process.
• B. The name of the configured LDAP server is Lab.
• C. FortiOS is able to locate the user in step 3 (Bind Request) of the LDAP authentication process.
• D. The user is authenticating using CN=John Smith.

Answer: A,D

NEW QUESTION # 33
Refer to the exhibit, which contains the output of diagnose vpn tunnel list.

Which command will capture ESP traffic for the VPN named DialUp_0?

• A. diagnose sniffer packet any 'port 4500'
• B. diagnose sniffer packet any 'ip proto 50'
• C. diagnose sniffer packet any 'host 10.0.10.10'
• D. diagnose sniffer packet any 'esp and host 10.200.3.2'

Answer: A

NEW QUESTION # 34
Refer to the exhibits.

An administrator is attempting to advertise the network configured on port3. However, FGT-A is not receiving the prefix.
Which two actions can the administrator take to fix this problem? (Choose two.)

• A. Manually add the BGP route on FGT-A.
• B. Restart BGP using a soft reset to force both peers to exchange their complete BGP routing tables.
• C. Use the set network-import-check disable command.
• D. Modify the prefix using the network command from 172.16.0.0/16 to 172.16.54.0/24.

Answer: C,D

NEW QUESTION # 35
Refer to the exhibit, which shows the partial output of a real-time OSPF debug.

Why are the two FortiGate devices unable to form an adjacency?

• A. One FortiGate device is configured to require authentication, while the other is not.
• B. The passwords on the FortiGate devices do not match.
• C. The two FortiGate devices attempting adjacency are in area 0.0.0.0.
• D. The Hello packet is being sent from an OSPF router with ID 0.0.0.112.

Answer: A

NEW QUESTION # 36
Refer to the exhibit, which shows the modified output of the routing kernel.

Which statement is true?

• A. The default static route through 10.200.1.254 is not in the forwarding information base.
• B. The default static route through port2 is in the forwarding information base.
• C. The egress interface associated with static route 8.8.8.8/32 is administratively up.
• D. The BGP route to 10.0.4.0/24 is not in the forwarding information base.

Answer: D

NEW QUESTION # 37
In IKEv2, which exchange establishes the first CHILD_SA?

• A. IKE_Auth
• B. CREATE_CHILD_SA
• C. IKE_SA_INIT
• D. INFORMATIONAL

Answer: B

NEW QUESTION # 38
......

Fortinet FCSS_NST_SE-7.6 Exam Syllabus Topics:

Give push to your success with FCSS_NST_SE-7.6 exam questions: https://braindumps.free4torrent.com/FCSS_NST_SE-7.6-valid-dumps-torrent.html