Updated Sep-2023 Exam Engine for 300-615 Exam Free Demo & 365 Day Updates
Exam Passing Guarantee 300-615 Exam with Accurate Quastions!
Cisco 300-615 (Troubleshooting Cisco Data Center Infrastructure) Certification Exam is designed to validate the skills and knowledge of professionals who are responsible for troubleshooting complex data center infrastructure environments. Troubleshooting Cisco Data Center Infrastructure certification exam is intended for network administrators, system engineers, and technical support professionals who want to demonstrate their expertise in identifying and resolving complex data center issues. 300-615 exam is based on the latest Cisco technologies and best practices, and passing it can lead to a range of career opportunities.
Difficulty in writing 300-615 Exam
Cisco 300-615: Troubleshooting Cisco Data Center Infrastructure is the most powerful certification that candidates can have on their resume. But for this, they will have to pass 300-615 questions. Cisco 300-615: Troubleshooting Cisco Data Center Infrastructure Exam is a challenging exam to pass this exam candidates will have to work hard with the help of right focus and preparation material passing this exam is an achievable goal.Free4Torrent help candidates by providing the most relevant and updated 300-615 exam dumps. Furthermore, We also provide the 300-615 practice test that will be much beneficial in the preparation. Free4Torrent aims to provide the best 300-615 exam dumps that is verified by the Cisco experts. If candidates feel any doubt in the 300-615 practice exams then our team is always there to help them. 300-615 exam dumps are the perfect way to prepare 300-615 exam with good grades in the just first attempt. So, candidates want instant success in the 300-615 exam with quality 300-615 training material then Free4Torrent is the best option for them because our management is well trained in it and we update each question of all exams on a regular basis after consulting recent updates with our Cisco certified professionals.
NEW QUESTION # 48
Refer to the exhibit.
A network engineer has connected the Nexus switch management port to the Internet using DHCP to allow the Guest shell running on the switch to download Python packages. The engineer can ping google.com successfully from the Nexus switch, but the Guest shell failed to download any Python packages. Which action resolves the problem?
- A. Update the Python packages on the Cisco Nexus switch directly.
- B. Manually configure DNS in the Guest shell, even if it is claimed on the Cisco Nexus switch through DHCP.
- C. Connect Guest shell to data plane interfaces to be able to connect to the networks outside the Cisco Nexus switch.
- D. Manually configure NTP in the Guest shell.
Answer: B
NEW QUESTION # 49
Cisco Unified Computing System Manager raises a critical error message that indicates that the system has overlapping Ethernet and FCoE VLANs. All of the Ethernet traffic on the overlapping VLANs drops. Which action resolves the issue?
- A. Change the PIN groups on the vHBAs.
- B. Modify the VLAN assignment to vNICs.
- C. Modify the FCoE VLAN.
- D. Set the FCoE VLAN as the native VLAN on server uplinks.
Answer: B
NEW QUESTION # 50
Drag and drop the actions from the left onto the faults that they resolve on the right. Not all options are used.
Answer:
Explanation:
NEW QUESTION # 51
A network engineer discovers a DNS resolution problem on a device that is using the Cisco Nexus Bash shell.
The device name is app with an IP address of 10.10.10.1. The primary server IP address is 172.16.10.1 and the secondary server IP address is 172.16.10.2. When the abc.com resolution fails, it should attempt to use efg.com. Which settings must be added to resolv.conf file to resolve the issue?
- A. Option B
- B. Option D
- C. Option A
- D. Option B
Answer: C
NEW QUESTION # 52
Refer to the exhibit.
A network administrator must delete a feature group from a Cisco Nexus 5000 Series Switch. Which action resolves the issue?
- A. Detach the association with the no rule command within the feature-group configuration
- B. Detach the association with the no role command within the feature-group configuration mode
- C. Detach the association with the no role command within the role configuration mode
- D. Detach the association with the no rule command within the role configuration mode
Answer: B
NEW QUESTION # 53
Refer to the exhibit.
Partial configuration from N9K-1 and N9K-2 is included. The client has two WANs connected.
* WAN-1 is for normal business-day activities.
* WAN-2 is for server backups during nonworking hours of 1:00 a.m. to 5:00 a.m. daily.
The client says that at the scheduled time for backup, the data center server failed to use the WAN-2 link to back up the servers to the cloud backup system. What is the solution to this problem?
- A. The Cisco Nexus switch must be configured with one applet because a configuration with two applets will fail.
- B. The applet called "Backup" must include an action to remove the current static route.
- C. The event timer must be written in epoch time format.
- D. The Cron entry must be configured without double quotes.
Answer: B
NEW QUESTION # 54
A network engineer is implementing the Cisco ACI Fabric and notices that the Leaf-1 switch is registered, has an assigned name, but is displayed as inactive in the APIC. After further investigation, it became clear that the leaf switch was recently moved from another Cisco ACI environment. Which action resolves the problem?
- A. Modify the ISIS interface peering IP address between apic 1 and Leaf-1
- B. Clean reload the Leaf-1 switch
- C. Change the clock offset from low to high between apic 1 and Leaf-1
- D. Define the new TEP address for Leaf-1
Answer: D
NEW QUESTION # 55
A firmware upgrade on a fabric interconnect fails. A bootflash contains a valid image. Drag and drop the recovery steps from the left onto the correct order on the right.
Answer:
Explanation:
NEW QUESTION # 56
Refer to the exhibit. An engineer discovered a VFC interface in a down state on a Cisco Nexus Switch. Which action resolves the problem?
- A. Reset the Cisco Nexus port toward the file server
- B. Change the cable between the switch and the server
- C. Update the CNA firmware and driver versions
- D. Modify the fip keepalive message time to 30 seconds
Answer: D
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/troubleshooting/guide/ N5K_Troubleshooting_Guide/n5K_ts_fcoe.html
NEW QUESTION # 57
Refer to the exhibit.
An engineer monitors a Cisco UCS server logs and discovers a blade discovery issue. Which procedure resolves the issue?
- A. 1. Verify the FSM status on the server.
2. Decommission the impacted server.
3. Reset the slot where the server is located.
4. Recommission the server. - B. 1. Verify the server power module.
2. Decommission the faulty module.
3. Insert a new power module.
4. Recommission the new module. - C. 1. Verify that server platform power is failed
2. Resolve the platform power issue.
3. Reboot the server.
4. Recommission the server. - D. 1. Verify that the power on self-test operation is failed.
2. Verify that the server firmware is corrupted.
3. Decommission the server firmware
4. Recommission the server with new firmware.
Answer: A
NEW QUESTION # 58
A network engineer experiences the error "DDR3_P1_B1_ECC" when upgrading Cisco UCS firmware.
Which action resolves the issue?
- A. Reset the BMC firmware
- B. Reflash the controller firmware
- C. Reset the DIMM
- D. Reflash the DIMM
Answer: C
NEW QUESTION # 59
Refer to the exhibit.
A network engineer needs to capture traffic from the VMs that utilize the IOM host interface Eth1/1/23 of a Cisco UCS B-Series chassis. A traffic analyzer is used to get traffic captured from the Eth1/4 interface of the subordinate fabric interconnect. The network engineer notices that traffic is not captured on the traffic analyzer. Which action resolves the issue?
- A. Span the traffic from the Eth 1/2 of the subordinate fabric interconnect.
- B. Span the traffic from the Eth 1/4 of the primary fabric interconnect.
- C. Span the traffic from the Eth 1/4 of the subordinate fabric interconnect.
- D. Span the traffic from the Eth 1/2 of the primary fabric interconnect.
Answer: B
NEW QUESTION # 60 
Refer to the exhibit. After the configuration is performed, the Guest shell continues to use 2% CPU. Which action resolves the issue?
- A. Resync the database
- B. Reboot the switch
- C. Reboot the Guest shell.
- D. Recreate the Guest shell.
Answer: C
Explanation:
Section: Automation
Explanation/Reference:
NEW QUESTION # 61
A Fibre Channel interface on a Cisco Nexus 5000 Series Switch receives bit errors, and the switch disables the interface. A temporary workaround must be implemented before the root cause is identified. Which action does an engineer take to prevent this issue from reoccurring?
- A. Verify that the SFPs are supported.
- B. Run the switchport ignore bit-errors command on the interface.
- C. Change the SFP to operate at 4 Gbps instead of 2 Gbps.
- D. Run the shutdown and then no shutdown command on the interface.
Answer: B
Explanation:
Section: Storage Network
NEW QUESTION # 62
Refer to the exhibit.
An upgrade operation fails with an error displayed. Which action resolve the issue?
- A. Use a different system image
- B. Use a different kickstart image
- C. Allocate extra space on a flash drive to extract a system image
- D. Allocate extra space on a flash drive to extract a kickstart image
Answer: A
Explanation:
Explanation
Kickstart image verification succeeded. System image has failed.
NEW QUESTION # 63
A mission-critical server is connected to site A.
Connectivity to this server is lost from site B because the MAC route is missing in the OTV VDC of the Nexus 7000 in site B due to MAC aging. Which action allows the flooding of the unknown unicast MAC on the Nexus 7000 in the OTV VDC?
- A. Use the otv isis bfd <> command to configure BFD protocol.
- B. Use route-map to advertise this MAC statically and redistribute with ISIS.
- C. Unknown unicast flooding is not allowed.
- D. Use the otv flood mac <> command to selectively flood traffic for a given MAC.
Answer: C
NEW QUESTION # 64
Cisco Unified Computing System Manager raises a critical error message that indicates that the system has overlapping Ethernet and FCoE VLANs. All of the Ethernet traffic on the overlapping VLANs drops. Which action resolves the issue?
- A. Modify the VLAN assignment to vNICs.
- B. Change the PIN groups on the vHBAs.
- C. Modify the FCoE VLAN.
- D. Set the FCoE VLAN as the native VLAN on server uplinks.
Answer: C
NEW QUESTION # 65 
Refer to the exhibit. vPC between switch1 and switch2 is not working. Which two actions are needed to fix the problem? (Choose two.)
- A. Activate VLANs on the vPC.
- B. Configure one of the switches as primary for the vPC.
- C. Configure vPC peer link and vPC peer keepalive correctly.
- D. Match vPC domain ID between the two devices.
- E. Configure IP address on the interface.
Answer: A,D
Explanation:
Section: Network
NEW QUESTION # 66
A firmware upgrade on a fabric interconnect fails. A bootflash contains a valid image. Drag and drop the recovery steps from the left onto the correct order on the right.
Answer:
Explanation:
NEW QUESTION # 67 
Refer to the exhibit. An engineer must connect N2K-Fex-1 and N5K-Core-1 so that the traffic flow between the two devices uses load balancing. After inspecting the statistics of the interconnecting interfaces, the engineer concludes that only one link is used. Which action resolves the problem?
- A. Configure each uplink to be a member of a separate LACP port channel.
- B. Configure the pinning max-link as 2.
- C. Configure destination-mac load balancing on N5K-Core-1.
- D. Configure source-destination load balancing on N5K-Core-1.
Answer: B
Explanation:
Section: Network
NEW QUESTION # 68
A Cisco Nexus 9000 Series Switch crashes and fails to boot. An engineer must recover the switch and investigate the issue. The switch uses 172.20.50.213/24 IP address for management and its default gateway is 172.20.50.254. Drag and drop the steps for recovering the Cisco Nexus 9000 Series Switch from the left onto the right. Not all steps are used.
Select and Place:
Answer:
Explanation:
NEW QUESTION # 69
......
Knowing the Associated Certification
Cisco 300-615, or DCIT, is related to two certifications. The first one is CCNP Data Center which is a professional certificate whose key focus is on the key operation, compute, automation, and management skills required to ensure hassle-free data center performance. Accredited individuals are known to be experts in creating viable data center solutions. Note that to earn it, you should pass the core exam 350-601 by code as well.
The second certification associated with Cisco 300-615 is Cisco Certified Specialist - Data Center Operations. As the name says, it is related to the specialist level and imparts the best-of-breed troubleshooting knowledge as well as an understanding of a data center infrastructure.
Exam Questions for 300-615 Updated Versions With Test Engine: https://braindumps.free4torrent.com/300-615-valid-dumps-torrent.html